I'm sharing a 14kt white gold, emerald cut Aquamarine, and diamond engagement ring. I made this for my friend's son to give his beautiful wife to be, she said yes!

The ring is a leaf design in 14kt yellow gold with a 14kt white gold cushion-shaped row of diamonds surrounding the .80 ct. center diamond. A different look to the very popular halo design.

There were 21 -3mm round diamonds weighing 2.41 carats used in this ring. Nice and smooth with lots of sparkle, easy to wear!

I combined the diamonds from an existing ring to create a new smooth, easy to wear design in 14kt white gold. From the side you can see the gallery (openings) that allows light in under the stones.

It's a 14kt yellow gold engagement/wedding ring with a pear-shaped diamond in the center and round diamonds burnish set in the sides. A sturdy, modern look, built to last!

These are matching wedding bands that were carved in wax, and then cast into 14kt yellow gold. The rings are made with a comfort fit design which means the inside of the bands are rounded to make wearing more comfortable. They are detailed with a traditional infinity design.

Here is a 14kt two-tone diamond engagement set. I had made the engagement ring at Christmas time and with the wedding next month it was time to make the criss-cross wedding band!

This is a wedding set cast in rose gold with diamonds. The engagement ring was made first, and then the two side bands were made to fit and follow the design.

This is a simple, elegant wedding band with subtle texture detailing.

This is a magnificent platinum and diamond ring! The center diamond is 5.13ct and there is .80ct of smaller diamonds set on the sides, and surrounding the diamond. Notice the small diamonds set in the metal under the center stone to add a little more sparkle!

This is a 14 kt white gold diamond engagement ring. It is a prong set halo design with diamonds channel set down the sides of the ring.

My customer had diamond studs and a single diamond ring that I combined and added small diamonds in the rollover spaces between the larger stones!

The top where the diamonds are set is white gold and the shank is yellow gold. I have noticed a trend that pear shaped and marquis cut diamonds are becoming popular again!

Here is a simple yet classic design in 14kt white gold that I created for someone who works with their hands. The bezel settings are smooth so there are no prongs to get caught on things! The center diamond is 1.24ct. and the trillion diamonds on either side weigh .25ct. each!

This is a diamond engagement ring with a cushion shaped halo design set in 14kt. white gold. The center diamond is .94 ct. This was a redesign with the customer’s diamonds. I supplied the diamonds that are set in the halo.

The top is white and the shank is yellow gold. Another lucky girl will be surprised sometime soon!

This is a 14kt. yellow gold 3 diamond bezel set engagement with channel set diamonds down the sides. I used the diamonds from an existing ring and added a 1/2 carat diamond to match the smaller diamond to balance the design. I like the smoothness of the bezels so there are no prongs to catch on things!

14kt white gold crisscross engagement ring, a version of a halo design.

This engagement ring is a hexagon design set in 14kt yellow gold with diamond baguettes on either side of the center diamond. It is a clean and simple design that a wedding band will fit nicely against the side since the hexagon top is raised up a bit.

This was special to me because I made jewelry for her grandparents, the diamonds belonged to her grandmother. I also made her parents their wedding rings! It’s hard to believe I’ve made jewelry for 3 generations!

This is a hand-carved wedding band with a fish engraving on it. Simple and subtle, this design gives an opportunity for an understated detail to a traditional gold band.

I set diamonds in the "V" shaped support underneath the halo. I think it makes a nice addition to the ring design!

I made this ring for my high school friend's son! Congratulations to them!

I'm sharing a sterling silver and 14kt yellow gold butterfly pin that will be pinned to a bride's bouquet. The gems are blue topaz that belonged to the bride's sister who passed away several years ago. The butterfly was cut out of a flat sheet of silver and the settings were soldered in place. The center setting and the antennae are gold for a bit of contrast! A sweet remembrance for the bride.

This is 14kt white gold wide diamond wedding band that was designed using my customers assorted diamonds that she had from several pieces. All the diamonds are channel or bezel set for smooth wearing.

This ring is made with the gems from a wedding band and engagement ring that I had to cut off my customer's hand. I removed all the stones and designed a new more streamlined look. The oval diamond is bezel set and the alternating diamonds and sapphires are channel set down the sides.

The 1.57 ct. Emerald cut diamond is set in a 4- prong white gold setting and the side diamonds are channel set. I alternated small round diamonds with diamond baguettes graduating down the sides to create a different look.

Stacking rings can be worn alone or in groups with similar styles. Two diamond bands are 14kt yellow gold and the alternating sapphire and diamond band is in 14kt white gold.

This ring is a redesign of a wedding set, taking the diamonds from 2 rings and combining into one ring. The diamonds are channel set for a smooth, easy to wear design.

This 14kt white gold band was made to follow the contours of the engagement ring so it fits right next to it. I then bead set diamonds, flush into the gold to match the size in the engagement ring and add sparkle! This way it looks like a set.

This is a 14kt yellow gold wedding/engagement ring that I recently completed. I took the diamonds from several existing rings and combined them to create a new look in one ring.

This is a wide diamond band that I recently created using a combination of my customer's diamonds. I supplied some of the smaller diamonds to complete the outer channel set rows for a smooth, wearable design.

his is a 14kt white gold, heart-shaped diamond engagement ring that I completed a few weeks ago. The diamond is 1.57 ct, prong set with smaller diamonds down the sides of the shank.

This is an 18kt yellow gold diamond eternity band that I just completed. I alternated 3x3 mm Ascher cuts and 3 mm brilliant round diamonds channel set to create a wider look. The ring has a low profile and the setting is smooth to make it easy to wear.

This is a 3-diamond ring set in 14kt white gold. My customer wanted to combine her diamond studs with her engagement ring diamond! I designed it with 6 prongs on each stone for security adding extra openings in the setting for more light to reach the diamonds.

This is a 3-stone diamond engagement ring. The center diamond is a beautiful .90ct. Brilliant round diamond with 2- 1/4 ct. diamonds on each side set in 14kt white gold.

This is a 14kt white gold diamond ring that I made recently for a customer with her diamonds. She wanted something different so I set the pear shaped diamond sideways in a bezel then pave set the small round diamonds down the sides of the shank.

This is a new ring design that I made with my customer's 1.01 carat radiant cut diamond and side diamonds in 14kt white gold. The center diamond is suspended between 2- "V" shaped bands and connected at the bottom for stability.

This is a 14kt white gold diamond and sapphire anniversary band that I recently completed. I alternated diamonds and sapphires that graduate in size with a 1/2 carat diamond in the center. The mounting is a "fish-tail" design.

For this project, I took the large center diamond out of the ring and had it recut because it had a bad chip. The recutting worked out well, the diamond only lost 9 points and was nicely restored. Then I made the new platinum diamond wedding band to fit next to the engagement ring. It curves to follow the shape of the ring.

This is an engagement ring that I made for a friend and customer who works with her hands and wanted something smooth and sturdy! The center diamond is .75 ct and bezel set with 3 diamonds channel set on each side.

This is a very special ring for a strong woman that desired the “wow” effect. The center diamond is 1.14 ct. and it is surrounded with 1.30 ct. of small diamonds set in 14kt white gold.

This is another version of my "wave" concept. This time it is an engagement ring set. The Engagement ring is a simple bezel set design with the wave design. Then the wedding band follows the curves of the design with pave set smaller diamonds.

This is a 14kt white gold wedding band that I created with 3 different sharks. My customer is a diver and happens to love sharks! Something a little different but jewelry can be truly personalized to your taste.

This is a ring with lots of bling that I just completed. The center diamond is 3.13 ct. and it's surrounded by over 3ct of smaller diamonds with trillion cut diamonds on the sides. The ring was made in 4 pieces, the diamonds were set, then it was assembled and soldered together.

This is a beautiful oval diamond engagement ring that I recently completed. I used marquis and round diamonds down the sides of the shank to add something a little different.

This is a 2.80 ct. Emerald cut diamond engagement ring that I recently completed. The ring is set in 14kt white gold with round diamonds down the sides of the shank. The simple, clean mounting helps to show off the beautiful center stone!

This is a ring that I just completed. My customer came in with 2 rings one from each of her Grandmothers that she wanted to make into 1 ring. The diamonds were slightly different in size so I came up with this design. This way the size difference is not so noticeable. The flowing lines on the shank added a little something different.

This is a geometric design engagement set that I just completed. The wedding band has a hook that fits into the diamond ring so it stays in place on the hand. The Emerald cut diamond weighs 3.06 ct. and is bezel set with a high polish finish.

This is a 14kt 2- tone diamond wedding set. My customer wanted a heart design with the heart going around the center diamond. The Engagement ring slips in the back of the insert ring through the curved opening.

This is a 14kt white gold Engagement ring that I recently completed. My customer wanted to redesign her ring to get rid of the prongs and make it smooth to wear. Right up my alley, so I designed it with a bezel for the center diamond and two rows of low profile channel set diamonds down the sides.

This is a 14kt white gold insert ring that I designed for my customer to go with her engagement ring. The center oval diamond ring slips into the insert which is a swirl design set with small diamonds.

This is a 14kt white gold diamond engagement set. I tried something different with the wedding band per my customer's request. The wedding band is open at the top and slips into the sides of the prongs on the marquis diamond and stays perfectly in place. I was pleased how nicely it lines up and matches the row of side diamonds.

This is a 14kt yellow gold 1.32 ct. oval diamond engagement ring, with round diamonds set down the shank, that we recently completed.